This LED strip is sold in 2.5m, 5m, 7.5m and 10m lengths. We can also supply bespoke lengths in increments of 5cm by special order with a 10-14 day lead time – Contact us for details.

As standard, this LED Strip is manufactured and supplied in 10m lengths, so purchases of strips other than these standard lengths are non-returnable as they have been cut to size or specially manufactured for you.

We supply 10m strips with an input cable at both ends. Other length (2.5m, 5m and 7.5m) strips have an input cable at one end.

Cutting and Sealing the LED Strip

The Waterproof LED strip can be cut with scissors, to as small as every 5cm. Once cut the end of the LED strip will need sealing. We sell small tubes of clear silicone and clear rubber end caps which can be used to seal the cut end of the LED strip. Select the ‘Sealing Kit’ in the blue options box if required. The kit includes two end caps and 1 small tube of silicone.

The LED strip is self adhesive backed, however water can degrade the adhesive over time. Alternatively, we sell clear mounting clips which screw down to secure the LED strip. Select ‘Mounting Clips’ in the blue options box if required. They are sold in packs of 20.

Up to 10 metres of LED strip can be wired in series with a 24V driver. Additional LED strips need to be connected in parallel (see the Diagram).

Installing the IP68 LED strip in a suitable housing

Due to the increased height of the IP68 LED strip, the only suitable profile is the ‘Square’ aluminium housing.

The post COB10-24V-IP68 Waterproof White LED Strip appeared first on LED Lighthouse.

Our new Red, Green Blue and White Neon Flex can be used both inside and out. Cuatomise the lengths required and the shade of White you would like.

Bespoke Product

Please note, this is a bespoke product that we will have specifically built to your specification. This involves a lead time of 3 weeks from date of purchase, to delivery.

Cutting, Sealing and Mounting LED Neon Flex

This Neon Flex can be cut with scissors, to as small as every 62.5mm. Once cut the end of the Neon Flex will need sealing. We sell small tubes of clear silicone, solid rubber end caps and end caps with cable entry.

The Neon Flex is held in position using small metal clips which screw down into position.

Powering LED Neon Flex

Up to 10 metres of Neon Flex can be wired in series with a 24V driver. Additional Neon strips need to be connected in parallel (see the Diagram).

Installation

The RGBW Neon Flex can be built to bend either side to side (side bend), or up and down on it self (top bend). Please select from the options below which you would like. The Neon Flex cannot bend both ways.

The post Bespoke Order RGBW Neon Flex 24v appeared first on LED Lighthouse.

The LED strip can be cut with scissors, to as small as every 3 LEDs (5cm). Once cut the end of the LED strip will need sealing. We sell small tubes of clear silicone and clear rubber end caps which can be used to seal the cut end of the LED strip. Select the ‘Sealing Kit’ if required. The kit includes two end caps and 1 small tube of silicone.

The LED strip is self adhesive backed, however water can degrade the adhesive over time. Alternatively we sell clear mounting clips which screw down to secure the LED strip. Select ‘Mounting Clips’ in the blue options box if required. They are sold in packs of 20.

Up to 5 metres of LED strip can be wired in series with the controller. Additional LED strips need to be connected in parallel (see the Diagram).

Installing the IP68 LED strip in a suitable housing

Due to the increased height of the IP68 LED strip, the only suitable profile is the ‘Square’ aluminium housing.

The post Waterproof RGB LED Strip Lights 60 LED/m 12V appeared first on LED Lighthouse.

This LED strip is sold in 2.5m, 5m, 7.5m and 10m lengths. We can also supply bespoke lengths in increments of 10cm by special order with a 10-14 day lead time – Contact us for details.

As standard, this LED Strip is manufactured and supplied in 5m and 10m lengths, so purchases of strips other than these standard lengths are non-returnable as they have been cut to size or specially manufactured for you.

We supply 5m and 10m strips with an input cable at both ends. Other length (2.5m and 7.5m) strips have an input cable at one end.

Cutting and Sealing the LED Strip

The LED strip can be cut with scissors, to as small as every 6 LEDs (10cm). Once cut the end of the LED strip will need sealing. We sell small tubes of clear silicone and clear rubber end caps which can be used to seal the cut end of the LED strip. Select the ‘Sealing Kit’ in the blue options box if required. The kit includes two end caps and 1 small tube of silicone.

The LED strip is self adhesive backed, however water can degrade the adhesive over time. Alternatively we sell clear mounting clips which screw down to secure the LED strip. Select ‘Mounting Clips’ in the blue options box if required. They are sold in packs of 20.

Up to 10 metres of LED strip can be wired in series with the controller. Additional LED strips need to be connected in parallel (see the Diagram).

Installing the IP68 LED strip in a suitable housing

Due to the increased height of the IP68 LED strip, the only suitable profile is the ‘Square’ aluminium housing.

The post Waterproof RGB LED Strip Lights 60 LED/m 24V appeared first on LED Lighthouse.