• Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
• Lower temperature: extends life of LEDs, reduces light decay.
• Protects against steam and water damage.
• No discolouring of waterproof coating.
• LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.

For indoor use only. For outdoors we recommend using fully waterproof IP68 LED Strip, Contact us for details.

To control your CCT LED Strips we recommend you use our CCT White Adjustable Controllers.

Strip Lengths

This strip is sold by the metre. This 24v CCT LED Strip Light is manufactured and supplied in 10m lengths, so purchases of strips less than 10m in length are non-returnable after they have been cut to size for you.

We supply 10 metre strips with an input cable at both ends. Shorter strips have an input cable at one end. The cable consists of 3 cores; white, yellow, brown.

You can cut the strip to length yourself (with scissors), to as small as every 27.78mm.

Up to 10 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

The post 24V CCT COB Adjustable White LED Strip IP65 appeared first on LED Lighthouse.

• Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
• Lower temperature: extends life of LEDs, reduces light decay.
• Protects against steam and water damage.
• No discolouring of waterproof coating.
• LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.

For indoor use only. For outdoors we recommend using fully waterproof IP68 LED Strip, Contact us for details.

To control your CCT LED Strips we recommend you use our CCT White Adjustable Controllers.

Strip Lengths

This strip is sold by the metre. This 12v CCT LED Strip Light is manufactured and supplied in 5m lengths, so purchases of strips less than 5m in length are non-returnable after they have been cut to size for you.

We supply 5 metre strips with an input cable at both ends. Shorter strips have an input cable at one end. The cable consists of 3 cores; white, yellow, brown.

You can cut the strip to length yourself (with scissors), to as small as every 13.38mm.

Up to 5 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

The post 12V CCT COB Adjustable White LED Strip IP65 appeared first on LED Lighthouse.

Manufactured using latest ultra efficient Epistar COB LEDs, waterproof to IP65 rating using waterproof micro coating; almost invisible and highly effective. Fitted with ‘3M’ self adhesive backing for a secure fit.

Micro Tech LED Strip Advantages

• Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
• Lower temperature: extends life of LEDs, reduces light decay.
• Protects against steam and water damage.
• No discolouring of waterproof coating.
• LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.

For indoor use only. For outdoors we recommend our Fully Waterproof IP68 LED Strip.

The post 24V Digitally Addressable RGB COB LED Strip Lights 840 LED/m IP65 appeared first on LED Lighthouse.

This LED strip is sold in 2.5m, 5m, 7.5m and 10m lengths. We can also supply bespoke lengths in increments of 5cm by special order with a 10-14 day lead time – Contact us for details.

As standard, this LED Strip is manufactured and supplied in 10m lengths, so purchases of strips other than these standard lengths are non-returnable as they have been cut to size or specially manufactured for you.

We supply 10m strips with an input cable at both ends. Other length (2.5m, 5m and 7.5m) strips have an input cable at one end.

Cutting and Sealing the LED Strip

The Waterproof LED strip can be cut with scissors, to as small as every 5cm. Once cut the end of the LED strip will need sealing. We sell small tubes of clear silicone and clear rubber end caps which can be used to seal the cut end of the LED strip. Select the ‘Sealing Kit’ in the blue options box if required. The kit includes two end caps and 1 small tube of silicone.

The LED strip is self adhesive backed, however water can degrade the adhesive over time. Alternatively, we sell clear mounting clips which screw down to secure the LED strip. Select ‘Mounting Clips’ in the blue options box if required. They are sold in packs of 20.

Up to 10 metres of LED strip can be wired in series with a 24V driver. Additional LED strips need to be connected in parallel (see the Diagram).

Installing the IP68 LED strip in a suitable housing

Due to the increased height of the IP68 LED strip, the only suitable profile is the ‘Square’ aluminium housing.

The post COB10-24V-IP68 Waterproof White LED Strip appeared first on LED Lighthouse.

The LED strip can be cut with scissors, to as small as every 3 LEDs (5cm). Once cut the end of the LED strip will need sealing. We sell small tubes of clear silicone and clear rubber end caps which can be used to seal the cut end of the LED strip. Select the ‘Sealing Kit’ if required. The kit includes two end caps and 1 small tube of silicone.

The LED strip is self adhesive backed, however water can degrade the adhesive over time. Alternatively we sell clear mounting clips which screw down to secure the LED strip. Select ‘Mounting Clips’ in the blue options box if required. They are sold in packs of 20.

Up to 5 metres of LED strip can be wired in series with the controller. Additional LED strips need to be connected in parallel (see the Diagram).

Installing the IP68 LED strip in a suitable housing

Due to the increased height of the IP68 LED strip, the only suitable profile is the ‘Square’ aluminium housing.

The post Waterproof RGB LED Strip Lights 60 LED/m 12V appeared first on LED Lighthouse.

Strip Lengths

This red LED strip is sold by the metre. 24v Coloured LED Strip Lights are manufactured and supplied in 10m lengths, so purchases of strips less than 10m in length are non-returnable after they have been cut to size for you.

We supply 10 metre strips with an input cable at both ends. Shorter strips have an input cable at one end.

You can cut the strip to length yourself (with scissors), to as small as every 6 LEDs (10cm).

Up to 10 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

The post Red LED Strip Lights – Splashproof 60 LED/m 24V appeared first on LED Lighthouse.

Strip Lengths

This green LED strip is sold by the metre. 24v Coloured LED Strip Lights are manufactured and supplied in 10m lengths, so purchases of strips less than 10m in length are non-returnable after they have been cut to size for you.

We supply 10 metre strips with an input cable at both ends. Shorter strips have an input cable at one end.

You can cut the strip to length yourself (with scissors), to as small as every 6 LEDs (10cm).

Up to 10 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

The post Green LED Strip Lights – Splashproof 60 LED/m 24V appeared first on LED Lighthouse.

This LED strip is sold in 2.5m, 5m, 7.5m and 10m lengths. We can also supply bespoke lengths in increments of 10cm by special order with a 10-14 day lead time – Contact us for details.

As standard, this LED Strip is manufactured and supplied in 5m and 10m lengths, so purchases of strips other than these standard lengths are non-returnable as they have been cut to size or specially manufactured for you.

We supply 5m and 10m strips with an input cable at both ends. Other length (2.5m and 7.5m) strips have an input cable at one end.

Cutting and Sealing the LED Strip

The LED strip can be cut with scissors, to as small as every 6 LEDs (10cm). Once cut the end of the LED strip will need sealing. We sell small tubes of clear silicone and clear rubber end caps which can be used to seal the cut end of the LED strip. Select the ‘Sealing Kit’ in the blue options box if required. The kit includes two end caps and 1 small tube of silicone.

The LED strip is self adhesive backed, however water can degrade the adhesive over time. Alternatively we sell clear mounting clips which screw down to secure the LED strip. Select ‘Mounting Clips’ in the blue options box if required. They are sold in packs of 20.

Up to 10 metres of LED strip can be wired in series with the controller. Additional LED strips need to be connected in parallel (see the Diagram).

Installing the IP68 LED strip in a suitable housing

Due to the increased height of the IP68 LED strip, the only suitable profile is the ‘Square’ aluminium housing.

The post Waterproof RGB LED Strip Lights 60 LED/m 24V appeared first on LED Lighthouse.

• Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
• Lower temperature: extends life of LEDs, reduces light decay.
• Protects against steam and water damage.
• No discolouring of waterproof coating.
• LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.

For indoor use only. For outdoors we recommend using fully waterproof IP68 LED Strip, Contact us for details.

To control your CCT LED Strips we recommend you use our CCT White Adjustable Controllers.

Strip Lengths

This strip is sold by the metre. This 24v CCT LED Strip Light is manufactured and supplied in 10m lengths, so purchases of strips less than 10m in length are non-returnable after they have been cut to size for you.

We supply 10 metre strips with an input cable at both ends. Shorter strips have an input cable at one end. The cable consists of 3 cores; white, yellow, brown.

You can cut the strip to length yourself (with scissors), to as small as every 6 LEDs (5cm).

Up to 10 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

The post 24V CCT Adjustable White LED Strip IP65 appeared first on LED Lighthouse.

Strip Lengths

This blue LED strip is sold by the metre. 24v Coloured LED Strip Lights are manufactured and supplied in 10m lengths, so purchases of strips less than 10m in length are non-returnable after they have been cut to size for you.

We supply 10 metre strips with an input cable at both ends. Shorter strips have an input cable at one end.

You can cut the strip to length yourself (with scissors), to as small as every 6 LEDs (10cm).

Up to 10 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

The post Blue LED Strip Lights – Splashproof 60 LED/m 24V appeared first on LED Lighthouse.