LED Dimmers Archives | LED Lighthouse https://www.led-lighthouse.co.uk/product-category/led-controllers-dimmers/led-dimmers/ Mon, 18 Nov 2024 12:42:43 +0000 en-GB hourly 1 https://wordpress.org/?v=6.6.2 https://www.led-lighthouse.co.uk/wp-content/uploads/2022/04/favicon_blue-100x100.png LED Dimmers Archives | LED Lighthouse https://www.led-lighthouse.co.uk/product-category/led-controllers-dimmers/led-dimmers/ 32 32 Remote Control LED Strip Dimmer in Black With Receiver https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/12-24v-led-dimming/remote-control-led-strip-dimmer-in-black-with-receiver/ https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/12-24v-led-dimming/remote-control-led-strip-dimmer-in-black-with-receiver/#respond Mon, 18 Nov 2024 12:38:08 +0000 https://www.led-lighthouse.co.uk/?post_type=product&p=184776 Remote Control Dimmer and Receiver - RF in Black

Suitable for switching and dimming 12/24V LED lights by remote control.

A low voltage power supply is required to power this dimmer and the lights it controls. We offer a range of Standard switching power supplies. This comes as the reomte only. Multiple P5 receivers can be paired to one han set, meaning LED strip installed in different locations can all be controlled from one hand set.

Wall mounted remote control holder included.

The remote has 3 scene buttons; select a light level, hold one of the scene save buttons for 2 seconds; the light level is saved for future recall.

Strong radio frequency signal ensures a control distance up to 30m from remote to receiver. 'Line of sight? isn't required - the receiver can be hidden out of sight.

Up to 5m of 12V LED strip or 10m of 24V LED strip can be connected in series with this dimmer. Additional LED strips could be connected in parallel providing the capacity of the dimmer isn't exceeded.

Control upto 180w at 12v and 360w at 24v.

The post Remote Control LED Strip Dimmer in Black With Receiver appeared first on LED Lighthouse.

]]>
The post Remote Control LED Strip Dimmer in Black With Receiver appeared first on LED Lighthouse.

]]>
https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/12-24v-led-dimming/remote-control-led-strip-dimmer-in-black-with-receiver/feed/ 0
Remote Control LED Strip Dimmer in Black (remote only) https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/12-24v-led-dimming/remote-control-led-strip-dimmer-in-black-remote-only/ https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/12-24v-led-dimming/remote-control-led-strip-dimmer-in-black-remote-only/#respond Mon, 16 Sep 2024 11:08:39 +0000 https://www.led-lighthouse.co.uk/?post_type=product&p=183567 Remote Control Dimmer - RF in Black

Suitable for switching and dimming 12/24V LED lights by remote control.

A low voltage power supply is required to power this dimmer and the lights it controls. We offer a range of Standard switching power supplies. This comes as the reomte only. The P5 receiver is also required in order to make the control work. Multiple P5 receivers can be paired to one han set, meaning LED strip installed in different locations can all be controlled from one hand set.

Wall mounted remote control holder included.

The remote has 3 scene buttons; select a light level, hold one of the scene save buttons for 2 seconds; the light level is saved for future recall.

Strong radio frequency signal ensures a control distance up to 30m from remote to receiver. 'Line of sight? isn't required - the receiver can be hidden out of sight.

Up to 5m of 12V LED strip or 10m of 24V LED strip can be connected in series with this dimmer. Additional LED strips could be connected in parallel providing the capacity of the dimmer isn't exceeded.

The post Remote Control LED Strip Dimmer in Black (remote only) appeared first on LED Lighthouse.

]]>
The post Remote Control LED Strip Dimmer in Black (remote only) appeared first on LED Lighthouse.

]]>
https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/12-24v-led-dimming/remote-control-led-strip-dimmer-in-black-remote-only/feed/ 0
RGB(W) WiFi-108 Smart LED Strip Controller Single or Multi-Zone https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/cct-white-adjustable-controllers/rgbw-wifi-108-led-strip-controller-single-or-multi-zone/ https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/cct-white-adjustable-controllers/rgbw-wifi-108-led-strip-controller-single-or-multi-zone/#respond Thu, 07 Jul 2022 08:31:59 +0000 http://led-test.unbranded.digital/?post_type=product&p=2491 The most advanced LED controller we sell!

Access your LED lighting from anywhere in the world with the Ltech WiFi-108. Compatible with single colour, CCT adjustable, RGB and RGBW LED lights.

Software Requirements - Android 4.0 or above, iOS 8.0 or above. Amazon Alexa compatible.

The post RGB(W) WiFi-108 Smart LED Strip Controller Single or Multi-Zone appeared first on LED Lighthouse.

]]>
Key product features

  • Control LED strip lighting with your Smartphone from anywhere in the world.
  • Alexa compatible
  • Supports both IOS products (iPod, iPhone, iPad…) and Android products (Samsung, HTC…)
  • Free app download available from Google Play and iTunes (L-BUS)
  • Simply connect the device to your local WiFi network to enable total control over your LED strip lighting.
  • Wireless or wired connection to the local WiFi network router.
  • Set up to 16 different scenes of LED lighting to suit any occasion.
  • Personalised timer functions enable timed control over the LED lights.
  • Can be used as a dimmer controller, colour temperature controller or colour controller for RGB or RGBW LED Strips – Altogether there are 4 interface options, each one designed especially for the LED Strip used.
  • Each WiFi controller can control up to 16 lighting zones. These 16 zones can be controlled separately or simultaneously.
  • Compatible with the ‘EX’ series touch panel and the ‘Q’ series hand held remote. For multi-zone installations wireless zone receivers (F4-5A, F4-3A) are required, one for each zone. Multiple receivers can be linked to form one single zone if required.
  • Control multiple WiFi-108 controllers through the L-BUS App. Each controller can still control up to 16 individual zones each and be accessed from anywhere in the world.
  • All of our ‘EX’ series touch panels and ‘Q’ series hand held remotes can be added into this system offering the user fixed dedicated wall mounted control and multiple remote control. The WIFI-108 controller and the ‘Q’ series remote or ‘EX’ series touch panels connect to the same wireless zone receivers.

Suggested matching items…

Zone Receivers: Useful when more than one zone of lighting requires control and/or a touch wall panel controller with multi-zones is integrated into the system. The WiFi controller transmits a wireless RF signal that can be received by wireless F4-5A/F4-3A zone control receivers. The ‘control receivers’ then control a zone of lighting each.

Wall Touch Controller: With the addition of a touch panel controller, wireless zone receivers (F4-5A/F4-3A) already used by the WiFi-108 can be controlled from a touch panel.

The post RGB(W) WiFi-108 Smart LED Strip Controller Single or Multi-Zone appeared first on LED Lighthouse.

]]>
https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/cct-white-adjustable-controllers/rgbw-wifi-108-led-strip-controller-single-or-multi-zone/feed/ 0
1-10V Dimmer Module 1 or 2 Way https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/1-10v-dimmer-module-1-or-2-way/ https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/1-10v-dimmer-module-1-or-2-way/#respond Thu, 07 Jul 2022 08:31:57 +0000 http://led-test.unbranded.digital/?post_type=product&p=2478 Generates a 1-10V Dimming Signal

This dimmer switch producers an output voltage ranging from 1-10V DC, depending on the position of the rotary knob. This voltage is a control signal. This signal is transmitted by wire to suitable LED Drivers. The 1-10V signal informs the drivers how to dim the lights connected to it. A voltage of 1V instructs the drivers to dim to maximum (no light), a voltage of 10V instructs the drivers to not dim at all (full brightness).

The post 1-10V Dimmer Module 1 or 2 Way appeared first on LED Lighthouse.

]]>
Key product features
  • 1 or 2 way – Can operate as a single switch or as one of two switches on a lighting circuit.
  • 1 Gang – One dimmer knob.
  • Push on, push off, rotary dimming control switch
  • Suitable for use with 1-10V LED Drivers
  • Short-circuit protection
  • Integrated over-temperature protection fuse
  • Smooth dimming operation from 0-100% light output
  • Maximum current rating of 5A
  • Complies with the latest Electrical Safety Standard fordimmer switches EN60669-2-1:2000
  • EMC Compliance ? EN550155

The post 1-10V Dimmer Module 1 or 2 Way appeared first on LED Lighthouse.

]]>
https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/1-10v-dimmer-module-1-or-2-way/feed/ 0
Q1 Multi Zone Dimmer RF Remote Controller https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/multi-zone-12-24v-led-dimmers/q1-multi-zone-dimmer-rf-remote-controller/ https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/multi-zone-12-24v-led-dimmers/q1-multi-zone-dimmer-rf-remote-controller/#respond Thu, 07 Jul 2022 08:31:57 +0000 http://led-test.unbranded.digital/?post_type=product&p=2480 Multi-Zone Dimmer RF Remote Controller

Multi-zone remote for dimming/switching up to 4 zones of white/single colour LED lights. Fitted with a touch sensitive dimming wheel and four pre-set light level keys (25%, 50%, 75% 100%), this remote provides quick and easy brightness selection. Each of the 4 zones can be selected/deselected, allowing synchronised or independent control of each zone. Four scene buttons allow the saving and recall of popular lighting scenes across all four zones.

This item is the remote control only, no receiver is included. It is designed to be used together with wireless receivers (F4-5A), multiple single zone touch panel controllers (E1S, EX1S) or a multi-zone touch panel controller (EX5), available to buy at the bottom of this page.

The post Q1 Multi Zone Dimmer RF Remote Controller appeared first on LED Lighthouse.

]]>
Setting up the ‘Q1’ to work with ‘F4-5A’ wireless receivers, ‘E’ and ‘EX’ series Touch Panels

This remote can be synchronised directly with and control ‘E’ or ‘EX’ series touch panels, providing the touch panel is connected to LED lights by wire (PWM or DMX). If an ‘EX’ series touch panel is controlling lights via RF using wireless receivers (F4-5A), then the ‘Q1’ remote must also be synchronised directly with those receivers, not the touch panel.

Requires 2 x AAA batteries. Batteries are not included.

The post Q1 Multi Zone Dimmer RF Remote Controller appeared first on LED Lighthouse.

]]>
https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/multi-zone-12-24v-led-dimmers/q1-multi-zone-dimmer-rf-remote-controller/feed/ 0
0/1-10V Dimmed LED Driver 20W 24V https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/0-1-10v-dimmed-led-driver-20w-24v/ https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/0-1-10v-dimmed-led-driver-20w-24v/#respond Thu, 07 Jul 2022 08:31:51 +0000 http://led-test.unbranded.digital/?post_type=product&p=2463 Allows 24V LED lights to be dimmed using a 0/1-10V Dimmer Switch. Alternatively this driver also has the feature to be dimmed by 10V PWM signal or resistance.

Key Features

  • Dimming range: 0-100%
  • Fully isolated plastic case with terminals IP20
  • Compliance to worldwide safety regulations for lighting

The post 0/1-10V Dimmed LED Driver 20W 24V appeared first on LED Lighthouse.

]]>
The post 0/1-10V Dimmed LED Driver 20W 24V appeared first on LED Lighthouse.

]]>
https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/0-1-10v-dimmed-led-driver-20w-24v/feed/ 0
0/1-10V Dimmed LED Driver 200W 24V https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/0-1-10v-dimmed-led-driver-200w-24v/ https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/0-1-10v-dimmed-led-driver-200w-24v/#respond Thu, 07 Jul 2022 08:31:50 +0000 http://led-test.unbranded.digital/?post_type=product&p=2461 Allows 24V LED lights to be dimmed using a 0/1-10V Dimmer Switch. Alternatively this driver also has the feature to be dimmed by 10V PWM signal or resistance.

Key Features

  • Dimming range: 0-100%
  • IP66 design for indoor and outdoor installation
  • Suitable for LED lighting and moving signs

The post 0/1-10V Dimmed LED Driver 200W 24V appeared first on LED Lighthouse.

]]>
The post 0/1-10V Dimmed LED Driver 200W 24V appeared first on LED Lighthouse.

]]>
https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/0-1-10v-dimmed-led-driver-200w-24v/feed/ 0
0/1-10V Dimmed LED Driver 45W 24V https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/0-1-10v-dimmed-led-driver-45w-24v/ https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/0-1-10v-dimmed-led-driver-45w-24v/#respond Thu, 07 Jul 2022 08:31:50 +0000 http://led-test.unbranded.digital/?post_type=product&p=2458 Allows 24V LED lights to be dimmed using a 0/1-10V Dimmer Switch. Alternatively this driver also has the feature to be dimmed by 10V PWM signal or resistance.

Key Features

  • Dimming range: 0-100%
  • Fully isolated plastic case with terminals IP20
  • Compliance to worldwide safety regulations for lighting

The post 0/1-10V Dimmed LED Driver 45W 24V appeared first on LED Lighthouse.

]]>
The post 0/1-10V Dimmed LED Driver 45W 24V appeared first on LED Lighthouse.

]]>
https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/0-1-10v-dimmed-led-driver-45w-24v/feed/ 0
0/1-10V Dimmed LED Driver 60W 24V https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/0-1-10v-dimmed-led-driver-60w-24v/ https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/0-1-10v-dimmed-led-driver-60w-24v/#respond Thu, 07 Jul 2022 08:31:50 +0000 http://led-test.unbranded.digital/?post_type=product&p=2459 Allows 24V LED lights to be dimmed using a 0/1-10V Dimmer Switch. Alternatively, this driver also has the feature to be dimmed by 10V PWM signal or resistance.

Key Features

  • Dimming range: 0-100%
  • IP66 design for indoor and outdoor installation
  • Suitable for LED lighting and moving signs

The post 0/1-10V Dimmed LED Driver 60W 24V appeared first on LED Lighthouse.

]]>
The post 0/1-10V Dimmed LED Driver 60W 24V appeared first on LED Lighthouse.

]]>
https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/0-1-10v-dimmed-led-driver-60w-24v/feed/ 0
0/1-10V Dimmed LED Driver 100W 24V https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/0-1-10v-dimmed-led-driver-100w-24v/ https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/0-1-10v-dimmed-led-driver-100w-24v/#respond Thu, 07 Jul 2022 08:31:50 +0000 http://led-test.unbranded.digital/?post_type=product&p=2460 Allows 24V LED lights to be dimmed using a 0/1-10V Dimmer Switch. Alternatively, this driver also has the feature to be dimmed by 10V PWM signal or resistance.

Key Features

  • Dimming range: 0-100%
  • IP66 design for indoor and outdoor installation
  • Suitable for LED lighting and moving signs

The post 0/1-10V Dimmed LED Driver 100W 24V appeared first on LED Lighthouse.

]]>
The post 0/1-10V Dimmed LED Driver 100W 24V appeared first on LED Lighthouse.

]]>
https://www.led-lighthouse.co.uk/shop/led-controllers-dimmers/led-dimmers/1-10v-led-dimming/0-1-10v-dimmed-led-driver-100w-24v/feed/ 0