LED Spike Garden Lights - #1 LED Supplier | LED Lighthouse

Mounting Bracket for Spike Lights

will — Thu, 07 Jul 2022 08:31:29 +0000

Cast Aluminium Mounting Bracket

This mounting bracket is designed to fit our spike lights, enabling them to be surface mounted.

A stainless steel fixing bolt is supplied to secure this bracket to the light fitting. Fixing bolts to mount this bracket to your chosen surface are not included.

The bracket is manufactured from cast aluminium and has the same high quality finish as our Spike Lights, offering a level of durability.

The post Mounting Bracket for Spike Lights appeared first on LED Lighthouse.

Waterproof 2 Terminal Connector IP67

will — Thu, 07 Jul 2022 08:31:03 +0000

This waterproof connector is used for joining two twin core round cables. It's ideal for joining the output cable from a driver to the input cable on a spike light circuit. Once installed the joint is waterproof to IP67.

This connector is included free of charge and supplied fitted to the cable when you purchase a spike light kit of 3 or 4 lights. You would only need to purchase this part if you were to use your own driver (transformer) or one of our MeanWell drivers.

The post Waterproof 2 Terminal Connector IP67 appeared first on LED Lighthouse.

Extension Cable For LED Spike Lights – IP65

will — Thu, 07 Jul 2022 08:31:02 +0000

Used to extend the cable between the power supply and each spike light, or between spike lights. The cable is available in 2 or 4 metre lengths. Fitted with a male screw connector one end, female the other. Each connector is fitted with a rubber seal for weatherproofing, IP65 rated.

The post Extension Cable For LED Spike Lights – IP65 appeared first on LED Lighthouse.

‘T’ Splitter For LED Spike Lights – IP65

will — Thu, 07 Jul 2022 08:31:02 +0000

'T' splitter suitable for our LED Spike Lights

Used to split and extend the 12V wiring circuit for our LED spike lights. The 'T' splitter has a male screw connector on the input and 2 female connectors on the output. The outputs connect with spike lights, extension cables or 'T' splitters.

The total length of this item is 1m (0.5m input cable, 0.5m output cable).

The post ‘T’ Splitter For LED Spike Lights – IP65 appeared first on LED Lighthouse.

LED Spike Garden Light – IP65

will — Thu, 07 Jul 2022 08:30:57 +0000

Single LED Spike light, energy efficient without compromising brightness!

Waterproof 'IP65' LED spike lights with quick and easy 'plug and go' installation.

Each spike light is built with a high power 5W Cree LED chip for superior light output, efficiency and life. Light output is comparable to 35W and 50W halogen spike lights.

Our LED Spike lights have a pure Aluminium die cast casing with toughened 5mm clear safety glass - making them one of the most robust LED Spike lights available.

Each spike light is fitted with a 40cm power cable, this can be extended using our extension cables.

The input cable is fitted with an IP65 'push and screw' connector incorporating a rubber gasket which compressors to a weather tight seal upon installation.

Powder coated with a black UV stable 'Akzo Nobel' finish and fitted with stainless steel '304' fixings, these lights will continue looking great regardless of weather conditions.

The post LED Spike Garden Light – IP65 appeared first on LED Lighthouse.

LED Spike Garden Light Kit – 3 Lights IP65

will — Thu, 07 Jul 2022 08:30:57 +0000

Powder coated with a black UV stable ‘Akzo Nobel’ finish and fitted with stainless steel ‘304’ fixings, these lights will continue looking great regardless of weather conditions.

Each spike light is fitted with a 40cm power cable, this can be extended using our extension cables.

The LED driver supplied is IP68 rated for outdoor use. It is not fitted with a UK 3 PIN plug, this would either need to be added by yourself or hard wired into a suitable outlet. The output cable from the driver can be extended using our extension cables.

The post LED Spike Garden Light Kit – 3 Lights IP65 appeared first on LED Lighthouse.

LED Spike Garden Light Kit – 4 Lights IP65

will — Thu, 07 Jul 2022 08:30:57 +0000

The LED driver supplied is IP67 rated for outdoor use. It is not fitted with a UK 3 PIN plug, this would either need to be added by yourself or hard wired into a suitable outlet. The output cable from the driver can be extended using our extension cables.

Our LED Spike lights have a pure Aluminium die cast casing with toughened 5mm clear safety glass – making them one of the most robust LED Spikelights available. Durable matt black finish. Cable length of 40cm, can be extended using our extension cables.

Our LED outdoor spike lights are popular replacement for halogen 35 and 50 watt spike lights. Uses only 5 watts of energy to produce a similar light output.

CE and ROHS approved to comply with UK safety regulations.

The post LED Spike Garden Light Kit – 4 Lights IP65 appeared first on LED Lighthouse.