Programmed to light up individual stair treads in sequence from either top to bottom, or bottom to top, depending which way you walk.

One PIR sensor is situated at the top of the stair case and the other at the bottom. If the bottom one is activated, the stair treads will light from the bottom to the top. The 2 stringers will also light from the bottom to the top. If the top PIR sensor is activated, the stair treads will illuminate from top to bottom, as will the 2 stringers.

The controller has the capacity to control 36 individual stair tread and both the left and right stringer. The stair treads are only available in single colours such as White, Red, Blue, Green or Pink. The stringers have a digital SPI connection to control the flow of the LED strip lights.

The controller can alter the length of time the LEDs are illuminated for and the speed at which the stairs will illuminate. Please see the data sheet for full installation and user instructions.

The post LED PIR Stair Tread Control appeared first on LED Lighthouse.

Ideal for controlling RGBW LED Strip but also suitable for RGB, CCT adjustable or single colour LEDs.

Unlike many DMX decoders, this 16 channel decoder has the option to assign multiple DMX channels to one address. For instance 4 output channels can be assigned to one DMX address, allowing the power capacity per DMX address to be quadrupled, while reducing the number of addresses the unit handles to four. Dimming curve options include; standard, linear, LOG, custom 0.1-9.9 dimming curve.

Featuring RJ45 and 5pin XLR DMX sockets.The DMX address is displayed digitally and adjusted by pressing buttons mounted next to the display or Via RDM function. The frequency of the output (PWM signal) and the dimming curve can both be adjusted to give optimum dimming across the 16 output channels. Also the dimming increments can be adjusted to either 8bit (256 levels) or 16bit (65536 levels).

This decoder requires a DMX control signal in order to function.

This decoder requires an LED driver in order to 'power up' and light the LEDs connected to it. The power output of this receiver is limited by the power output of the LED driver.

Fitted with four fixing/mounting points situated on the base.

The post LT-916 16 Channel DMX Decoder XLR-5 / RJ45 appeared first on LED Lighthouse.

Ideal for controlling RGB LED Strip but also suitable for CCT adjustable or single colour LEDs.

Unlike many DMX decoders, this 12 channel decoder has the option to assign multiple DMX channels to one address. For instance 3 output channels can be assigned to one DMX address, allowing the power capacity per DMX address to be tripled, while reducing the number of addresses the unit handles to four. Dimming curve options include; standard, linear, LOG, custom 0.1-9.9 dimming curve.

Featuring RJ45 and 5pin XLR DMX sockets.The DMX address is displayed digitally and adjusted by pressing buttons mounted next to the display or Via RDM function. The frequency of the output (PWM signal) and the dimming curve can both be adjusted to give optimum dimming across the 12 output channels. Also the dimming increments can be adjusted to either 8bit (256 levels) or 16bit (65536 levels).

This control receiver requires a DMX control signal in order to function. This decoder requires an LED driver in order to 'power up' and light the LEDs connected to it. The power output of this receiver is limited by the power output of the LED driver. The controller has four fixing/mounting points situated on the base.

The post LT-912 12 Channel DMX Decoder XLR-5 / RJ45 appeared first on LED Lighthouse.

Ideal for controlling RGB LED Strip but also suitable for CCT adjustable or single colour LEDs.

Unlike many DMX decoders, this 24 channel decoder has the option to assign multiple DMX channels to one address. For instance 3 output channels can be assigned to one DMX address, allowing the power capacity per DMX address to be tripled, while reducing the number of addresses the unit handles to eight. Dimming curve options include; standard, linear, LOG, custom 0.1-9.9 dimming curve.

Featuring RJ45, 3pin and 5pin XLR DMX sockets.The DMX address is displayed digitally and adjusted by pressing buttons mounted next to the display or Via RDM function. The frequency of the output (PWM signal) and the dimming curve can both be adjusted to give optimum dimming across the 16 output channels. Also the dimming increments can be adjusted to either 8bit (256 levels) or 16bit (65536 levels).

This decoder requires a DMX control signal in order to function. It also requires an LED driver in order to 'power up' and light the LEDs connected to it. The power output of this receiver is limited by the power output of the LED driver.

Fitted with six fixing/mounting points situated on the base.

The post LT-924 24 Channel DMX Decoder XLR-3 / XLR-5 / RJ45 appeared first on LED Lighthouse.

Ideal for controlling RGBW LED Strip but also suitable for RGB, CCT adjustable or single colour LEDs.

Unlike many DMX decoders, this 32 channel decoder has the option to assign multiple DMX channels to one address. For instance 4 output channels can be assigned to one DMX address, allowing the power capacity per DMX address to be quadrupled, while reducing the number of addresses the unit handles to eight. Dimming curve options include; standard, linear, LOG, custom 0.1-9.9 dimming curve.

Featuring RJ45, 3pin and 5pin XLR DMX sockets.The DMX address is displayed digitally and adjusted by pressing buttons mounted next to the display or Via RDM function. The frequency of the output (PWM signal) and the dimming curve can both be adjusted to give optimum dimming across the 16 output channels. Also the dimming increments can be adjusted to either 8bit (256 levels) or 16bit (65536 levels).

This decoder requires a DMX control signal in order to function. It also requires an LED driver in order to 'power up' and light the LEDs connected to it. The power output of this receiver is limited by the power output of the LED driver.

Fitted with six fixing/mounting points situated on the base.

The post LT-932 32 Channel DMX Decoder XLR-3 / XLR-5 / RJ45 appeared first on LED Lighthouse.

Unlike other DMX decoders, this 5 channel decoder has the option to assign multiple DMX channels to one address. For instance all 5 output channels can be assigned the same address, allowing the full power capacity of the unit to control single coloured lighting on one DMX address. Dimming curve options include; standard, linear, LOG, custom 0.1-9.9 dimming curve.

Featuring RJ45 and 5pin XLR DMX sockets.The DMX address is displayed digitally and adjusted by pressing buttons mounted next to the display or Via RDM function. The frequency of the output (PWM signal) and the dimming curve can both be adjusted to give optimum dimming across the 5 output channels. Also the dimming increments can be adjusted to either 8bit (256 levels) or 16bit (65536 levels).

This control receiver requires a DMX control signal in order to function.

This controller requires an LED driver in order to 'power up' and light the LEDs connected to it. The power output of this receiver is limited by the power output of the LED driver.

The controller has four fixing/mounting points situated on the base.

The post LT-905 5 Channel DMX Decoder XLR-5 / RJ45 appeared first on LED Lighthouse.